E-Tachi B12 Flash File SC6531E Tested with Boot Key

Flash File

Download ETachi B12 flash file SC6531 tested firmware. How to flash E-Tachi B12 flash file using Infinity CM2. This is 4MB bin file tested firmware.

How to Flash E-Tachi B12

  • Download Infinity CM2SCR Tool and SPD Drivers.
  • Install CM2SCR Tool and Drivers.
  • Download E-Tachi B12 Flash File
  • Extract Firmware and Open CM2Scr Tool
  • Select SC6531 E000 and choose Bin File to flash
  • after that connect phone with boot key
  • Boot Key is left ok button

Log

Operation : Read Flash [ v1.02 ]

  1. Power off device
  2. Press and hold BootKey or use BootCable
  3. Insert cable and battery in device!

Wait for device …

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Ok!

Saved to : C:\Users\H2Five\Desktop\etachi b12 bkp\FLASH_DUMP.bin

Done!
Elapsed: 00:01:14

Reconnect Power/Cable!

Leave a Reply

Your email address will not be published. Required fields are marked *