Infinix Smart 3 (X5516C) Flash File V142 New Update Scatter File

Download Latest Official scatter file for Infinix X5516C (Smart 3). How to Flash Infinix Smart 3 and unbrick the phone from boot loop (Semi-dead) or complete dead (Showing MTK Port only). This file can be flashed using Infinity CM2 MTK Tool or SP Flash Tool with DA file.

You can flash this file on FRP locked phone to unbrick and bring it to life. This file is the latest Build and you will find this file in the premium section on every site but I am here sharing a link to download it free.

How to Flash

Flashing this firmware is quite easy if you have Infinity CM2 Dongle or any other professional MTK tool. If you want to flash your phone with the free tool then go head to SP Flash Tool. You need a Scatter file and DA File to flash this phone. Download Both from the download section at the bottom of this page.

  • Extract the firmware zip file and install the Infinity CM2MT2 setup. Install MTK Drivers.
  • Open Tool and select scatter file from the extracted firmware
  • Click on Flash
  • Power off Infinix Smart 3 and connect with USB Cable without holding any Key

Note: Always Take Backup before any operations, User data and Nandroid Backup is necessary. We are not responsible for any loss/damage to your phone or data. IMEI Change is illegal only write original IMEI. All Tutorials and Articles on ALLABOUTFLASHING.COM are for educational purpose only. Kindly Read Privacy Policy

Flashing Succuss Log from CM2

Operation : Write Flash [ v2.20 ]
 Repartition   : Enabled
 Flash Verify  : Disabled
 Reg.Pre-Erase : Enabled
 Verify HW/SW  : Enabled
 SData Backup  : Disabled
 Safe UserData : Disabled
 Flash Format  : Disabled
 Files :22
 [FL] : Set : preloader_x5516_go.bin
 [FL] : Set : recovery.img
 [FL] : Set : sec.img
 [FL] : Set : md1rom.img
 [FL] : Set : spmfw.img
 [FL] : Set : tinysys-scp.bin
 [FL] : Set : tinysys-scp.bin
 [FL] : Set : tinysys-sspm.bin
 [FL] : Set : tinysys-sspm.bin
 [FL] : Set : lk.bin
 [FL] : Set : lk.bin
 [FL] : Set : boot.img
 [FL] : Set : logo.bin
 [FL] : Set : dtbo.img
 [FL] : Set : tkv.img
 [FL] : Set : tz.img
 [FL] : Set : tz.img
 [FL] : Set : vendor.img
 [FL] : Set : system.img
 [FL] : Set : vbmeta.img
 [FL] : Set : cache.img
 [FL] : Set : userdata.img
 [FL] : Total size : 0x77A57A18 [ 1.87 GB ]
 Make sure device is powered off. Power off, if need. Wait 20 seconds after
 Insert USB cable in phone
 Waiting for device connection … 
 PTFN : MediaTek PreLoader USB VCOM (Android) (COM13)
 MODE : PRELOADER PORT
 PORT : 13
 Waiting BOOT ack …
 PRELOADER : ACK confirmed!
 BROM : Init BROM
 BROM init passed!
      CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
      CODE : Merlot
      TYPE : MODERN RAPHAEL
 BROM : SecLevel : 0x00000005
 BROM : SecMode  : SBC+SDA
 BROM : BROM|BL  : 0xFF|0x03
 BROM : PRELOADER PORT
 MODE : INFINIX : SECURE_BASE | Manual : Disabled
 BROM : SOCID : 6B3A8ABAB974A6A8AF194FD73F4AB5202F71466D3201B07A36DE5D869D35C6F9
 AGENT : Look for suitable BootChain in DA … 
 AGENT : MTK_AllInOne_DA_SWSEC.bin
 AGENT : Found MT6761
 AGENT : MTK_DOWNLOAD_AGENT
      BROM : Sending 1st DA …
 BROM : DA sent
 BROM :Transfer control to DA … 
      DA : AGENT started!
 DA : SYNC
      DA : MODE : PRELOADER
 DA : EXT_RAM initialized!
 DA : BOOT to 2nd DA …
 DA : 2ND stage confirmed!
 DA : SYNC with DA passed!
 DA : Receiving HW info
     SRAM: 0x00080000 [ 512.00 KB ]     DRAM: 0x80000000 [ 2.00 GB ]     EMMC: 7001005442323831362312509FEF3695     EMMC: VEN : KINGSTON | OEM : 01 | DEV : TB2816     EMMC:            BOOT1  : 0x00400000 [ 4.00 MB ]           BOOT2  : 0x00400000 [ 4.00 MB ]           RPMB   : 0x00400000 [ 4.00 MB ]           USER   : 0x3A8000000 [ 14.63 GB ]     CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000     RNID : 611EE46588ACF277A4D4AD36C9E178EE
 DA : USB : HIGH-SPEED
 Boot done!
 [FL] : HW verification passed!
 SEC_DL : False (RAPHAEL)
 SEC_ID : 0x494E46494E495459424F584245535432
 [FL] : Pre-Erase 
 Erase : 0x0000000000000000 : 0x0000000003688000
 Erase : 0x0000000005688000 : 0x0000000006000000
 Erase : 0x000000000C800000 : 0x0000000000800000
 Erase : 0x0000000010000000 : 0x0000000000200000
 Erase : 0x0000000010500000 : 0x0000000008900000
 Erase : 0x000000001CE00000 : 0x0000000159200000
 [FL] : RePartition 
 [FL] : RePartition Ok!
 [FL] : Flashing now … 
 Write : PRELOADER
 Update bootloader backup copy … 
 Update bootloader backup copy Ok!
 Write : RECOVERY
 Write : SEC1
 FAIL : SEC : IMG TYPE MISMATCH
 Write : MD1IMG
 FAIL : SEC : IMG TYPE MISMATCH
 Write : SPMFW
 Write : SCP1
 Write : SCP2
 Write : SSPM_1
 Write : SSPM_2
 Write : LK
 Write : LK2
 Write : BOOT
 Write : LOGO
 Write : DTBO
 Write : TKV
 Write : TEE1
 Write : TEE2
 Write : VENDOR
 Write : SYSTEM
 Write : VBMETA
 Write : CACHE
 Write : USERDATA
 Ultra : Ok!
 SEC_DL : False (RAPHAEL)
 SEC_ID : 0x494E46494E495459424F584245535432
 [FL] : RePartition 
 [FL] : RePartition Ok!
 [FL] : Flashing finished!
 Done!

Download Infinix Smart 3 (X5516C) Flash File

This is download section and you will find all version flash file for Infinix smart 3. Download DA File for X5516

X5516C-H613E-PGo-190719V142 [Latest] || File Size: 1.07 GB

X5516c_H613E_PGo_MT6761_V85 || File Size: 1.03 GB

Leave a Comment