QMobile X33 Flash File Fix White Screen After Flash

Download Qmobile x33 tested the flash file and fix white screen, Hang on logo, or unbrick the dead phone. You can flash this file using CM2 Tool. This Firmware is Stock Firmware and safe to flash. How to Revive Unbricked Qmobile x33. Boot key for Qmobile x33.

qmobile x33 boot key
qmobile x33 flash file gsm-forum
qmobile x33 after flash white display
qmobile x33 pac file
qmobile x33 noir flash file

How to Flash

Download and install SPD Drivers. Open CM2SPD Module and select SP[SC773x] eMMC [Android 6.x]. Make sure to backup first.

Choose Flash Tab and select PAC file and click on Flash. Press and Hold Volume Down(as a boot key) and insert USB Cable.

👉 UMT Pro Ultimate HST Tool(HiSilicon Service Tool) v0.1 Alpha 3

Log

Operation: Flash v1.27

======= Flash
Files set for flashing :
[ MCU ] : Qmobile_X33_MP_V07_24_07_2017.pac
CRVersion : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : SC7731_eMMC_X33_QMOBILE_X33_6.0_INFINITY-BOX
File : Infinity_fdl1.bin
File : Infinity_fdl2.bin
File : nvitem_w.bin
File : nvitem_wcn.bin
File : prodnv.img
File : u-boot-spl-16k.bin
File : sc7731C_CP0_modem.bin
File : DSP_DM_Gx.bin
File : sc8830g_modem_CP2_WCN_Trunk_W17.21.3_Release.bin
File : logo_480x800.bin
File : fblogo_480x800.bin
File : boot.img
File : system.img
File : sysinfo.img
File : cache.img
File : recovery.img
File : userdata.img
File : u-boot.bin

  1. Remove battery. Insert battery back
  2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
    -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
  3. Insert cable ==== Wait for phone…

Phone found! [ 16 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
PMTManager : Load 0x19 records
PMTManager : PMT Update Ok!
Flashing now

[FlashProc] : CODE
Current ID : PRODNV
Current File : prodnv.img
Flashing now …
[FlashProc] : Ok! [FlashProc] : ERASE
Current ID : ERASEUBOOT
Current Part : uboot
[FlashProc] : Ok! [FlashProc] : ERASE
Current ID : FLASH
Current Part : wruntimenv1
[FlashProc] : Ok! [FlashProc] : ERASE
Current ID : FLASH_WCN
Current Part : wcnruntimenv1
[FlashProc] : Ok! [FlashProc] : ERASE
Current ID : ERASEMISC
Current Part : misc
[FlashProc] : Ok! [FlashProc] : BOOTCODE
Current ID : SPLLOADER
Current File : u-boot-spl-16k.bin
Flashing now …
[FlashProc] : Ok! [FlashProc] : CODE
Current ID : MODEM_W
Current File : sc7731C_CP0_modem.bin
Flashing now …
[FlashProc] : Ok! [FlashProc] : CODE
Current ID : DSP_W
Current File : DSP_DM_Gx.bin
Flashing now …
[FlashProc] : Ok! [FlashProc] : CODE
Current ID : MODEM_WCN
Current File : sc8830g_modem_CP2_WCN_Trunk_W17.21.3_Release.bin
Flashing now …
[FlashProc] : Ok! [FlashProc] : CODE
Current ID : BOOTLOGO
Current File : logo_480x800.bin
Flashing now …
[FlashProc] : Ok! [FlashProc] : CODE
Current ID : FASTBOOT_LOGO
Current File : fblogo_480x800.bin
Flashing now …
[FlashProc] : Ok! [FlashProc] : CODE
Current ID : BOOT
Current File : boot.img
Flashing now …
[FlashProc] : Ok! [FlashProc] : IMAGE
Current ID : SYSTEM
Current File : system.img
Flashing now …
[FlashProc] : Ok! [FlashProc] : CODE
Current ID : SYSINFO
Current File : sysinfo.img
Flashing now …
[FlashProc] : Ok! [FlashProc] : IMAGE
Current ID : CACHE
Current File : cache.img
Flashing now …
[FlashProc] : Ok! [FlashProc] : CODE
Current ID : RECOVERY
Current File : recovery.img
Flashing now …
[FlashProc] : Ok! [FlashProc] : IMAGE
Current ID : USERDATA
Current File : userdata.img
Flashing now …
[FlashProc] : Ok! [FlashProc] : BOOTCODE
Current ID : UBOOTLOADER
Current File : u-boot.bin
Flashing now …
[FlashProc] : Ok!

Elapsed: 00:04:30

Reconnect Power/Cable!

Firmware Details

File nameQmobile_X33_MP_V07_24_07_2017.pac
BrandQMobile
ModelX33
Android Version6.0
File Size1.10 GB
CPUSC7731

Download

Qmobile_X33_MP_V07_24_07_2017

Leave a Comment